Quality Office Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.
Customer Service Hotline:
+8613261677119
Quality Office Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.+8613261677119
TL;DR - The Mistairhome WL-AH06O (PRO) holds 510 mL and mists 49 mL per hour or 24.1 mL per hour, which is 10.4 hours and 21.2 hours per fill; the oil side takes 5.4 mL and runs 20.8 hours per fill at 0.26 mL per hour; it covers 18 sq m (188 sq ft) at a 2.6 m ceiling and measures 26.9 dB on the high step and 24.2 dB on the sleep step; it draws 3.5 W and takes its supply from USB-C 5V/2A, runs from a monitor hub or a phone charger; oil tray behind a flip door on the back, filled without moving the unit; the humidistat holds target band 30 to 75 percent in 5 percent steps, held within 3 percent over Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing, and desk schedule by weekday, with an oil level reminder rather than a guess, voice runs through Amazon Alexa and Google Home for on off, mist step and the burst mode; no internal cell on this build; it weighs 527 g and measures 15.2 x 15.2 x 23.6 cm, and ships documented to CE / RoHS / FCC standards for import into Pakistan. MOQ is 200 units per SKU with a 20-30-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Essential Oil Humidifier Rechargeable category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH06O-PRO:
| Misting method | Ultrasonic piezo disc at 1.7 MHz under a diffuser cone that breaks the plume early |
| Tank capacity | 510 mL |
| Mist output on the high step | 49 mL per hour |
| Mist output on the low step | 24.1 mL per hour |
| Run time per fill on the high step | 10.4 hours |
| Run time per fill on the low step | 21.2 hours |
| Coverage area | 18 sq m (188 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 26.9 dB |
| Noise at 1 m on the sleep step | 24.2 dB |
| Scent delivery method | Oil tray behind a flip door on the back, filled without moving the unit |
| Oil tray capacity | 5.4 mL |
| Oil contact parts | PP tray with a Viton seal, rated for peppermint and eucalyptus |
| Scent intensity control | Three intensity steps with a 30 minute burst mode for meeting rooms |
| Scent run time per tray fill | 20.8 hours |
| Oil use per hour | 0.26 mL per hour |
| Water type | Tap or distilled; a demineralisation cartridge drops into the filler neck |
| Mineral dust handling | Cartridge bay in the neck, and the cone keeps any residue off the desk |
| Fill method | Top fill through a 62 mm opening, no need to lift the tank off |
| Battery pack | Not fitted, runs from the USB-C supply |
| Cordless run time | Not applicable, mains or USB powered |
| Charge time | Not applicable, no internal cell |
| Power input | USB-C 5V/2A, runs from a monitor hub or a phone charger |
| Rated power on the high step | 3.5 W |
| Control interface | Touch panel with three mist steps, scent step, display dim and a timer |
| Network link | Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing |
| App platform | desk schedule by weekday, with an oil level reminder rather than a guess |
| Voice assistant support | Amazon Alexa and Google Home for on off, mist step and the burst mode |
| Humidistat range and accuracy | target band 30 to 75 percent in 5 percent steps, held within 3 percent |
| Scheduling | Seven day schedule with four events per day and power-failure memory |
| Night light | Soft underside glow in seven colours, dimmable to off for shared desks |
| Protection | Dry-run shut-off, tilt switch, overcurrent limit, sealed base gasket |
| Dimensions | 15.2 x 15.2 x 23.6 cm |
| Weight | 527 g |
| Warranty | 18 months |
| Shipped kit | Pro build, + spare misting disc + demineralisation cartridge + 5 oil pads + multilingual manual |
| Units per master carton | 24 |
| Lead time | 20-30 days |
The strongest pull in Pakistan now comes from hospitality, retail and facilities buyers rather than households, because they can put a number on complaints, on dwell time and on room-turn minutes, which makes the decision easy to defend internally. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and gift supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
For the Essential Oil Humidifier Rechargeable segment the deciding specifications are whether the oil stays out of the water path, whether the scent step can be turned down far enough for a shared room, and what the unit does with dissolved minerals. Peak mist volume ranks below all three, which surprises first-time buyers. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Pakistan through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. On the WL-AH06O (PRO) the figures worth carrying into the next order are the 510 mL tank, the 20.8 hours of scent per oil fill, and the 24.2 dB reading on the sleep step.
Three numbers decide whether this category works in a room, and only one of them appears on most specification sheets. The first is millilitres per hour, quoted for both steps so a buyer can divide it into the tank capacity and know how long a fill lasts before ordering a single unit. The second is hours per fill, which is the number that decides whether a unit needs filling every night or every second night - and therefore whether it survives its first season in a household.
The third is the oil side, and it is the one nobody quotes. Scent is consumed at a rate, not by a setting, and across this range that rate sits between roughly 0.22 and 0.35 mL per hour depending on the step and the disc. Divide the tray capacity by that rate and a buyer knows how many nights a fill of oil lasts, which is the figure that decides whether the product is a pleasure or a chore. Ours is published per model and per step.
Every production batch is sampled for four things before release: mist output against the declared figure by weighed run, the decibel reading at one metre on both steps, oil tray seal integrity after a 72 hour soak in a citrus blend, and dry-run shut-off function on an empty tank. For this configuration that means 24.1 mL per hour at 24.2 dB, holding 21.2 hours per fill and 20.8 hours of scent across an 18 sq m (188 sq ft) room.
Three deployment records from the Essential Oil Humidifier Rechargeable programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A 19th-century canal warehouse rebuilt as a shared office for 14 small studios
Timing: One year from March 2025
Fourteen studios with fourteen opinions is the hardest kind of site to specify, and the solution was boring: every unit runs water only, and the scent question was removed from the shared areas entirely. Where scent did go in was the ground-floor meeting room, on a timer, switched by whoever books it. The lesson we now pass on is that shared space and scent rarely mix, and a programme that can run unscented is worth more to a landlord than one that cannot.
Deployment: A 280 sq ft flat on the 19th floor of a 1960s block, air conditioning for eight months of the year
Timing: One year from July 2025
Space is the whole specification in a flat this size: the unit had to fit on a bedside shelf next to a phone charger and be filled at a bathroom sink, not carried to a kitchen. A 250 mL chassis with a screw base went in, and the buyer's second order six months later was for four friends in the same block. The pattern in dense cities is that the form factor decides the sale and the capacity decides whether the customer comes back.
Deployment: A business hotel with 70 rooms running generator power for part of every day
Timing: One year from June 2025
Generator hours are the specification in this market, and the hotel's first question was whether the unit would survive a changeover twice a day. It does, because the control board stores its state and the shut-off is hard-wired rather than firmware, but the honest note is about the adapter: a cheap one fails within weeks. Seventy units went in with wide-input adapters and not one has come back for an electrical fault.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH06O (PRO) packs 24 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.5 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC01-BEDTIME | Master bedrooms where the scent is part of the wind-down routine | A scent that fades before the sleeper notices it, and a tank that lasts the night | A scheduled step-down holds output low overnight, the light goes fully dark, and the tray runs out of oil around the time the sleeper does. |
| SC05-TREATMENT | Rooms booked back to back, where the scent has to leave before the next client | A scent that clears between appointments rather than building up | Scent and mist run on separate timers, so the room can be scented for a session and cleared with plain mist before the next client arrives. |
| SC09-HALL | Open-plan lobbies with a ceiling well above a residential one | Output sized against volume, with a target rather than a step | A large-tank chassis holds a measured target and stops when the room arrives, which is the only way a tall space is controlled rather than merely filled. |
| SC03-WORKDESK | A single workstation with a laptop, a phone and a shared air supply | Moisture at the desk, and no smell a neighbour can object to | A compact chassis on the low step, placed upwind of the face rather than beside the keyboard, with the scent step left off in shared space. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 24.1 mL per hour at 24.2 dB, holding 21.2 hours per fill and 20.8 hours of scent across an 18 sq m (188 sq ft) room.
Three costs dominate ownership of this product and only one of them is on the invoice. The first is the appliance. The second is the consumable - cartridges, pads, replacement discs and, on many programmes, the oil itself - which is where the repeat revenue sits for every distributor we work with and which should be planned as a line item rather than bought occasionally. The third is staff time, because a tank that cannot be cleaned quickly is a tank that does not get cleaned.
A factory programme attacks all three. Consumables ship in the same container as the appliances, which is the cheapest way to buy them. Cleaning intervals are published rather than left to guesswork, and the tank geometry is chosen so the published interval is actually achievable by one person on a round.
What we do not offer is the lowest unit price in the market. A cheaper unit in this category usually buys a narrower tank neck, a disc of unspecified origin, seals that swell on contact with citrus oil and no spares path, and every one of those shows up later as a cost somewhere else. For this configuration that means 24.1 mL per hour at 24.2 dB, holding 21.2 hours per fill and 20.8 hours of scent across an 18 sq m (188 sq ft) room.
Compliance in this category splits into three burdens that buyers often treat as one. The first is electrical and appliance safety: the CE technical file, an EMC test report and the IEC 60335-1 household appliance safety report, which is the set that gets a unit onto a shelf in Europe. The second applies only where a cell is fitted: a UN38.3 test report with an IEC 62133 cell report and an MSDS, which is the set that gets a unit onto a vessel.
The third is the oil, and it is the one that catches importers out. Where we ship oil with the unit we provide an IFRA-aligned statement of conformity, an allergen declaration listing the 26 declarable substances where they are present, an MSDS per blend and a flash point figure. That last number decides how the consignment is classified for transport: a blend below 60 C ships as a UN1266 Class 3 flammable liquid with the corresponding documentation and packaging, and a buyer who discovers this at the booking desk discovers it too late.
RoHS and REACH declarations cover the appliance materials, and because the oil contacts specific parts we also issue a material declaration for the tray, the seal and the pad rather than for the unit as a whole. Where a market needs a local approval, we issue against PSE, KC or RCM at the same time as the CE work rather than after it, because the test evidence largely overlaps. On the WL-AH06O (PRO) the figures worth carrying into the next order are the 510 mL tank, the 20.8 hours of scent per oil fill, and the 24.2 dB reading on the sleep step.
The economics of this line are an annuity, not a one-off sale, and buyers who plan it that way outperform the ones who do not. The appliance is the entry; the cartridge, the pad, the replacement disc and, on most programmes, the oil are the repeat, and in the pharmacy, gift and hospitality channels the consumable revenue overtakes the appliance revenue within the first year.
Freight is the part that needs doing carefully. At 0.167 cubic metres per carton of 24 units, a 40 ft container carries roughly 6,720 units by volume, and a 20 ft about 3,048. Those are upper bounds before pallet and loading losses, and the honest planning figure is a little below them.
What we suggest to a first-time buyer is deliberately unglamorous: a mixed trial order across two or three SKUs, spares at one disc per twenty units, a stated lead time of 20-30 days written on the proforma invoice, and a re-order point set by sell-through rather than by calendar. On the WL-AH06O (PRO) the figures worth carrying into the next order are the 510 mL tank, the 20.8 hours of scent per oil fill, and the 24.2 dB reading on the sleep step.
What order size does Wanlin accept for a first aroma humidifier shipment?
200 units per SKU on standard builds, 300 where a custom colour or private-label packaging is involved, and several models may share one container provided each SKU clears its own minimum. For a buyer testing the category for the first time, a mixed container is the lower-risk route and is the one we recommend over a single-SKU container on an unproven model.
Is the scent too strong for a bedroom, and can it be switched off?
Scent is the most common cause of a unit being unplugged, so this range treats it as a setting rather than a feature. WL-AH06O offers three intensity steps with a 30 minute burst mode for meeting rooms, and the tray can be left empty entirely, which is what most nurseries, shared offices and clinical rooms specify. A bedroom on the low step sits well under anything a neighbour would notice, and the light, soft underside glow in seven colours, dimmable to off for shared desks, switches fully off.
Will an ultrasonic aroma humidifier put mineral dust on dark furniture?
On hard water, yes, unless the build deals with it. The disc atomises the water and everything dissolved in it, and the minerals settle as a white film. For WL-AH06O-PRO the answer built into the specification is cartridge bay in the neck, and the cone keeps any residue off the desk. Where a buyer wants the question removed entirely, running on distilled water removes it without any cartridge.
What documentation comes with an aroma humidifier shipment for customs?
CE technical file, RoHS and REACH declarations, an EMC report and the IEC 60335-1 appliance safety report as standard, plus UN38.3, IEC 62133 and MSDS on any build carrying a cell, and FCC for the digitally controlled models going to North America. Where oil ships with the unit: an IFRA statement of conformity, an allergen declaration, an MSDS per blend and the flash point figure that decides transport classification. Every document names WL-AH06O rather than a family, which is what a customs officer checks.
Is private label available across the aroma humidifier range?
Across the whole range, including housing colour, logo, retail artwork, manual language, the accessory kit and the gift-box configuration. Most of it works inside existing tooling, so it does not add engineering time. What it does add is a decision about consumables, and we raise that early because the cartridge and pad choices affect the return rate more than any artwork decision does.
What is the cleaning routine, and how much staff time does it take?
Five to seven days in continuous use, or three to four where a scent runs daily, with a dry-out before any period of storage. The routine takes under two minutes on this chassis because the tank opening is wide enough for a hand and a brush, which is deliberate. A narrow-neck tank takes longer, gets cleaned less often, and eventually gets replaced - which is the real cost of a cheap moulding. Where a Pakistan supply is hard the interval shortens rather than lengthens, and we would rather say that at quotation stage than have a buyer discover it from a complaint.
What happens if a unit fails inside the warranty period?
18 months on WL-AH06O against manufacturing defect. In practice most failures outside the warranty period are a worn disc, a scaled cartridge or a seal that has met the wrong oil rather than a faulty appliance, which is why we stock all three as separate lines and ship them with the units. A distributor who can supply the part keeps the customer.
What is the timeline from sample approval to a shipped container?
From approved sample to a shipped container, 20-30 days for first production plus the freight booking step, which is longer on battery builds because of the cell documentation and on any order carrying oil because of the transport classification. Sampling itself is 5 to 7 working days on an existing specification. We put the production figure on the proforma invoice so it is a commitment rather than an estimate.
The programme suits any buyer who has to answer for the product after it is sold, which in practice means everyone except the pure spot trader. A distributor carrying a range needs to know which chassis to put in front of which customer, and the answer is usually decided by water hardness, by who refills the tank, and by how much scent the room will accept.
Hospitality buyers need a fill interval that fits a housekeeping round. Clinical and childcare buyers need a material declaration for every oil contact part and a light that can be turned fully off. Retail and fragrance buyers need a tray they can demonstrate in front of a customer in under a minute. Facilities buyers need one unit per occupied room rather than one per floor, and they need the reasoning written down so it survives staff turnover.
What all of them have in common is that they are specifying against a room and a routine rather than against a specification sheet, which is why we ask about the site before we quote the unit. For this configuration that means 24.1 mL per hour at 24.2 dB, holding 21.2 hours per fill and 20.8 hours of scent across an 18 sq m (188 sq ft) room.
A first order runs in five steps and none of them need to be slow. The first is the specification: which chassis, which SKU build, and which markets, because the market list decides the documentation. The second is sampling, 5 to 7 working days from an existing specification or 15 to 20 if a custom colour is required.
The third is the paperwork - certificates, manuals, artwork, the battery files where a cell is fitted and the oil declarations where oil ships - and it runs in parallel with the second rather than after it, which is where most of the time is either saved or lost. The fourth is production, measured from order confirmation and deposit. The fifth is booking, which is where a battery build or an oil set needs its extra few days.
What we ask a buyer to decide before step one is which consumables and which oil travel with the appliances, because that choice affects the packing list, the freight classification and the lead time, and changing it later costs a second shipment. The WL-AH06O (PRO) packs 24 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.5 W on the high step.
Two things decide whether this product works, and neither is on the box: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. Get those two right and the rest of the specification rarely matters.
Everything else on this page exists to make those two decisions possible before money moves - the figures by model rather than by marketing tier, the measurement conditions stated next to the decibel, the oil rate stated per hour, and the honest statement of where the answer depends on the room.
Enquiries are welcome from anyone supplying this category at volume, whether as an importer, a distributor, a brand owner, a fragrance or gift company, a facilities or hospitality group, or a cross-border seller. Samples and the full documentation set are available on request. The WL-AH06O (PRO) packs 24 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.5 W on the high step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
